Embedded Files
You can send SMS or email if you require service when the shop is not open to arrange appointment.
I don't work on eBikes electrical components and suspension service due to specialist equipment required at this time.
Basic Service from $60 | for bikes that had regular service only needing quick tune
Basic Service from $60 | for bikes that had regular service only needing quick tune
Recommended every 6 months, Service includes:
PACKAGE OPTIONS:
+ For additional $20per part installed, will replace drivetrain components if you provide the parts like chain, cassette or crankset, cables.
- MTB or Disc equipped bikes - $80
- General check and inspection
- Check Cabling and Fine-tune front and rear derailleurs and gear cable tension
- Inspect brake pads for wear or damage
- Check rim brake pads for wear
- Disc brake check
- Chain wear check, degrease and relube
- Examine all fittings and bolts for correct tension
- Fine-tune brakes/brake calipers and brake cable tension
- Test ride
PACKAGE OPTIONS:
- MTB full suspension links package:
- Wheelset hubs overhaul package:
- Headset bearings package:
- Bottom Bracket bearings service package:
+ For additional $20per part installed, will replace drivetrain components if you provide the parts like chain, cassette or crankset, cables.
Comprehensive Service from $ 90 | for bikes in fair condition and needing more TLC
Comprehensive Service from $ 90 | for bikes in fair condition and needing more TLC
Recommended every 12 months, Service includes:
PACKAGE OPTIONS:
+ For additional $15 per part installed, will replace drivetrain components if you provide the parts like chain, cassette or crankset, cables.
- MTB or disc equipped bikes - $110
- Basic service, plus;
- Check electronic shifting, micro indexing if required
- Cleaning and lubing of mechanical shifters and derailleurs moving parts
- Check brakes and shifter cables and lubing if necessary
- Check rim brake pads and adjustment of position and toe if applicable
- Check disc rotors for wear
- Disc brakes check and minor rotor truing if necessary
- Fine-tune and adjust front and rear hub bearings preload.
- Straighten Derailleur hanger if required
- Inspect drivetrain components including chain, cassette or freewheel, and chainrings for wear
- wipe down of frame
- Test ride
PACKAGE OPTIONS:
- MTB full suspension links package:
- Wheelset hubs overhaul package:
- Headset bearings package:
- Bottom Bracket bearings service package:
+ For additional $15 per part installed, will replace drivetrain components if you provide the parts like chain, cassette or crankset, cables.
Epic Service from $140 - $160* | 1-2 Days service | for bikes that has not seen any service for many years
Epic Service from $140 - $160* | 1-2 Days service | for bikes that has not seen any service for many years
Recommended every 24 months, with every part cleaned, greased and reinstalled. This will include:
PACKAGE OPTIONS:
+ For additional $15 per part installed, will replace drivetrain components if you provide any of the parts like chain, cassette or crankset, cables
+ Price varies depending on: Rim brakes ($140) disc brakes, state of bike, dual suspension, intergrated cockpit and hydraulic brakes (from $160)
- Comprehensive service, plus;
- Bike stripped to almost bare frame
- All parts degreased, cleaned & lubricated
- Disc brake pistons cleaned and reset
- Headtube clean and regreasing
- Wheelset hubs adjustment and fine tuning
- Bottom Bracket check
- Top-up recommended air pressure for MTB shocks
- Complimentary bike cleaning
- Test ride
PACKAGE OPTIONS:
- MTB full suspension links package:
- Wheelset hubs overhaul package:
- Headset bearings package:
+ For additional $15 per part installed, will replace drivetrain components if you provide any of the parts like chain, cassette or crankset, cables
+ Price varies depending on: Rim brakes ($140) disc brakes, state of bike, dual suspension, intergrated cockpit and hydraulic brakes (from $160)
Custom Bike Build from $130
Custom Bike Build from $130
- $130 for rim brakes external routing
- $150 for rim brakes with internal routing
- $180 for disc brakes with external routing
- $200 for disc brakes with internal routing
- BYO frameset and components - the owner have responsibility to make sure components are compatible to the build
- Mechanical or electronic group set
- Internal or external cable routing
- Fork steerer cut and adjustment over a time period
- Positioning on the bike
*Additional cost for more complicated build
Brake Bleed - Shimano/SRAM Avid/Tektro/Formula - from $25 per wheel
Brake Bleed - Shimano/SRAM Avid/Tektro/Formula - from $25 per wheel
- Remove wheel and brake pads
- Bleed brake with new fluid (DOT or mineral oil)
- Reinstall pads, adjust brake caliper
- Test ride
Gear Service from $15
Gear Service from $15
- $15 for adjustments only and adjustment of front and rear derailleurs and gear cable tension
- $30 as above plus inspect cabling, lubing or replacing if necessary
- Gear indexing
- Additional $10/shifter if new cable required for external routing
- Additional $20/shifter if required for internal routing
- Test ride
- Hydraulic brake bleed separate job
*Jagwire shifter cable $7 each
Brake Service - Rim $30| Mechanical Disc $40
Brake Service - Rim $30| Mechanical Disc $40
- Inspect brake pads for wear or damage, replace if necessary
- Inspect disc rotors for wear or damage
- Adjust brake toe
- Adjust brake pad or disc calipers position
- Clean disc caliper pistons
- Adjust brakes and brake cable tension
- Minor disc truing
- Test ride
Tubeless Wheel Set-up from $20 per wheel
Tubeless Wheel Set-up from $20 per wheel
- Difficult Rim+tyre combo - 30 per wheel
- Bring your suitable tubeless ready rims
- BYO tubeless set-up (tubeless tyres, tubeless valves, sealant and if needed tubeless rim tape of correct size)
- Clean and inspect rim interior
- Inspect tyre
- Install tubeless valve
- Install sealant, seat and inflate tyre
- Instructions for ongoing maintenance
- Additional $10 to install tubeless conversion strip/tape
- Additional $20 to remove old tubeless tape and prep clean per wheel
*if you don't bring your own sealant, additional $10/wheel will be added. NO STANS sealant brand used in workshop.
Specialist Service from $10
$50 each for the following jobs
- Bottom bracket bearing removal and replacement
- Press-fit bottom bracket removal and replacement
- Removal of crankset and Bottom bracket regreasing
$40 each for the following jobs
- Direct mount chainring replacement
- Dropper post install - internal cabling
- Headset installation, service and removal
$30 each for the following jobs
- Internal shifter cable and housing removal and replacement per shifter kit
- Internal brake cable and housing removal and replacement per brake kit
- Headset removal and regreasing
- Crankset removal
- dropper post - external cabling
- Wheel hub overhaul and regreasing per wheel
- Cartridge bearing hub servicing if possible
$20 each for the following jobs
- External shifter cable and housing replacement per shifter kit
- External brake cable and housing replacement per brake kit
- Drop handlebar wrap removal and wrapping
- chain removal and installation
- cut for carbon handle bars, seat post or fork steerer excludes disassembly
MTB Full Suspension Linkages Service $100+
MTB Full Suspension Linkages Service $100+
Recommended every 24 months,
+ Complex suspension system may not be serviceable. I'll inform you if this is the case.
- Disassemble suspension linkages
- Regrease bearings if applicable
+ Complex suspension system may not be serviceable. I'll inform you if this is the case.
Wheel truing from $25 per wheel for external nipple
Wheel truing
- True wheel and tension spokes
- Replace broken or damaged spokes if provided by customer.
- For internal nipple wheels, bring replacement rim tape- $35 per wheel
- Tubeless wheel set-up is a separate job
+ price applicable only if the tyre is off the rimadditional $10 to remove tyre on internal nipple
Wheel tension balancing from $50/wheel for external nipple
Wheel tension balancing from $50/wheel for external nipple
- Check all tension of spokes
- Balance left and right spoke tension according to rim manufacturer if available
- Diagnose bent or flat spot from damaged rim.
- Wheel truing to correct tension lateral and radial
- For internal spokes, bring appropriate replacemnt rim tape. $70/wheel
- Tubeless wheel set-up is a separate job
Fix Flat Tyre from$10 per wheel
- BYO inner tube
- Remove wheel, remove tyre and tube
- Inspect rim tape and valve hole for damage
- Inspect tyre for debris
- Replace tube, reinstall tyre and tube
- Reinstall wheel
- For difficult rim + tyre combo extra cost will be charged.
- Additonal $5 for patch repair
Best online bicycle shop in Australia
https://www.velogear.com.au/ (can be hit and miss)
Popular online bicycle store overseas
https://www.merlincycles.com/
https://www.chainreactioncycles.com/au/en
Page updated
Google Sites
Report abuse